Principal Power Electronics Engineer

Apply now

ON.energy is setting the standard for large load interconnection. ON’s patented AI UPS™ is a medium-voltage UPS that serves as a firewall, protecting the data center from the grid, and the grid from the data center. With multiple gigawatts currently under construction, we are enabling grid-safe data centers. 

We are hiring a Power Electronics Engineer to own the power conversion system (PCS) in our product, both how it is designed and how it behaves. This is a product-focused role. You will lead PCS product design and documentation, tune inverter controls, lead lab and field testing, and prove ride-through and fault compliance in GFL and GFM modes.

You will work closely with our PCS suppliers' controls teams and with our business development, project, commissioning and O&M engineering teams. You will report to the Senior Power Electronics Manager.

What You Will DoControls, testing and grid compliance
  • Own inverter control settings. Define, tune and maintain the control and protection parameters for MW-scale PCS in GFL and GFM modes, including current and voltage loops, PLL, droop and virtual impedance, current limiting and overload, and ride-through curves. Maintain a controlled settings baseline per project and per firmware release.
  • Lead system testing. Plan and run grid-integration test campaigns at national-lab and third-party facilities, as well as factory (FAT) and site tests. Write test procedures, analyze waveforms and issue reports.
  • Prove grid-code compliance. Demonstrate that the system meets LVRT/HVRT, frequency ride-through, phase-jump, fault-current and reactive-current requirements under IEEE 2800, IEEE 1547 / UL 1741 and ERCOT rules, for both the grid-side GFL converter and the load-side GFM converter.
  • Analyze fault and weak-grid behavior. Study 3-phase and unbalanced faults, low-SCR operation, paralleled-converter interaction and circulating currents. Recommend control or setting changes and verify them in test.
  • Support simulation and HIL studies. Work with our modeling team (PSCAD, OPAL-RT, Typhoon HIL) to define study and HIL test cases, supply settings and test data, review reports, and confirm results match field and lab behavior.
Product and project engineering
  • Lead PCS product design. Recommend design approaches and main-equipment vendors, and participate in product design sprints with the development team.
  • Serve as technical lead with PCS suppliers. Review firmware releases and change logs, specify required behavior, and qualify new or second-source inverters against a common test set.
  • Support business development. Prepare technical proposals, including single-line diagrams (SLDs) and general arrangements (GAs) tailored to customer needs.
  • Support project execution. Compile technical information packages for project engineering, co-lead review and validation of PCS topics, and maintain technical documentation, including as-built drawings.
  • Support commissioning and O&M. Participate in commissioning, resolve field events from the waveform up, and feed design improvements back into the product.
Required Qualifications
  • Bachelor's degree in Electrical Engineering, Power Electronics Engineering or a similar field (MS or PhD a plus)
  • 8+ years of hands-on power electronics engineering in project-based or industrial settings
  • Proven system-level design experience on MW-scale power electronics equipment
  • Understanding of how BESS integrates with power electronics equipment
  • Hands-on control design or tuning of three-phase grid-connected inverters: dq current control, PLL and synchronization, and DC-link control
  • Working knowledge of grid-forming control (droop, VSG, virtual impedance) and how GFM current limiting differs from GFL
  • Direct experience with ride-through and fault behavior of inverter-based resources (LVRT/HVRT, reactive current injection, negative-sequence response) and the grid codes that govern them
  • Ability to read and critically review PSCAD/EMT study reports and HIL (OPAL-RT, Typhoon) results, and compare them with measured test data
  • Experience planning and running tests on MW-scale inverters or BESS: lab, FAT or site commissioning
  • Ability to produce and read SLDs and GA drawings
  • Strong waveform and data analysis skills using Python, MATLAB or similar
  • Excellent communication across technical and non-technical teams, with clear technical writing for test procedures, reports and settings rationale
Preferred Qualifications
  • Experience with BESS, UPS / mission-critical or utility-scale infrastructure projects, including IEC 62040-3 performance classes
  • Paralleled converters on common AC and DC buses: load sharing, zero-sequence and circulating-current control, interleaving
  • Weak-grid (low-SCR) stability analysis and small-signal or impedance-based methods
  • Grid-integration testing at a national lab or accredited facility
  • Hands-on use of PSCAD, MATLAB/Simulink or real-time simulation (RTDS, OPAL-RT, Typhoon HIL)
  • ERCOT interconnection experience (NOGRR 245 / 282, large-load ride-through)
  • Experience working with an inverter OEM's firmware and parameter sets as the customer, not only as the designer
  • AutoCAD and protection settings coordination
Tools and Standards You Will Work With
  • Simulation: PSCAD/EMTDC and PSS/E study reports; OPAL-RT and Typhoon HIL results
  • Test and analysis: Power analyzers, high-speed DAQ, scopes, Python/MATLAB
  • Grid codes: IEEE 2800, IEEE 1547 / UL 1741 SB, ERCOT Nodal Operating Guides, NERC reliability guidelines
  • UPS: IEC 62040-3
  • Equipment: MW-scale liquid-cooled PCS, 1.5 kV DC battery systems, MV transformers

For US-based roles - What you’ll get:

  • Competitive salary + annual performance-based bonus eligibility
  • Medical, dental, and vision insurance
  • 401(k) with company match
  • Paid time off and company holidays 

For Mexico-based roles - What you’ll get:

  • Competitive salary + annual performance bonus eligibility
  • Christmas Bonus (Aguinaldo): 30 days
  • Major medical expenses and life insurance
  • Paid time off and holidays (per local policy)

For all roles:

  • Professional development and growth opportunities
  • Opportunity to grow with a mission-driven team shaping the future of clean energy
  • Equal Opportunity: ON.energy is committed to equal employment opportunity and to maintaining a work environment free of harassment, discrimination, or retaliation.
  • Benefits vary by role and location and are subject to change.

Agency Notice: ON.energy does not accept unsolicited resumes from staffing agencies, search firms, or third-party recruiters. Resumes submitted without a fully executed Master Services Agreement (MSA) and a written request from an authorized member of our Talent Acquisition team will be considered the property of ON.energy. No placement fees or compensation will be paid for unsolicited candidate submissions.