Senior Process & Mechanical Engineers - Carbon Capture (CCUS)

Apply now

ABOUT CANEIL


CANEIL is building a carbon capture (CCUS) team for an upcoming client project in Alberta, starting January 2027. The work involves point-source CO₂ capture integrated with an existing facility: flue gas collection and ducting, solvent-based absorption and regeneration, and CO₂ compression, dehydration, and pipeline or storage interfaces. Roles are based in Calgary, with in-office work at the client's office preferred; remote or hybrid arrangements may be considered for candidates with extensive carbon capture experience.


OPEN POSITIONS


  • Senior Process Engineer – Carbon Capture (CCUS)
  • Mechanical Senior Engineer 1 – Absorption Systems
  • Mechanical Senior Engineer 2 – Compression & Chilling
  • Designer – Flue Gas / Exhaust Ducting


Please note in your application which role(s) you are applying for. Candidates may be considered for more than one role.



SENIOR PROCESS ENGINEER – CARBON CAPTURE (CCUS)


Lead the process design of the capture facility from technology selection through FEED, detailed design, and startup.


RESPONSIBILITIES


  • Evaluate capture technologies (amine and advanced solvents, sorbents, membranes) for capture rate, energy use, cost, and integration with the host facility.
  • Prepare and review the design basis, heat and material balances, PFDs, P&IDs, data sheets, relief load summaries, and control narratives.
  • Develop process simulations of absorption, regeneration, CO₂ dehydration, and compression; optimize regeneration energy and heat integration.
  • Define CO₂ product specifications and address solvent degradation, emissions, and corrosion.
  • Lead HAZOP/LOPA reviews, review licensor and vendor performance guarantees, and coordinate with other disciplines and EPC partners.
  • Support commissioning, startup, proposals, and funding submissions, and mentor junior engineers.


REQUIREMENTS


  • Bachelor's degree in Chemical or Process Engineering.
  • 10+ years of process engineering in oil and gas, gas processing, refining, petrochemical, power, or similar industry, including 5+ years on carbon capture or closely related gas treating (amine treating, acid gas removal, CO₂ recovery).
  • Process deliverables on projects that reached FEED, detailed design, or construction.
  • Strong knowledge of absorber/stripper design and expert use of Aspen Plus, HYSYS, ProMax, or ProTreat.
  • Understanding of CO₂ dehydration, compression, and dense-phase pipeline specifications; API 520/521, ASME B31.3, CSA Z662/Z741.
  • Lead process experience on a capture project, brownfield integration, and familiarity with the CCUS Investment Tax Credit and Alberta's TIER program are strong assets.



MECHANICAL SENIOR ENGINEER 1 – ABSORPTION SYSTEMS


Lead the mechanical design and specification of the absorption and solvent regeneration equipment, working closely with the process lead, licensor, and fabricators.


RESPONSIBILITIES


  • Mechanical design of absorber, stripper, wash, and direct contact cooler columns, including shells, nozzles, supports, and platforms.
  • Specify column internals (packing, distributors, collectors, demisters) and solvent-handling equipment (lean/rich exchangers, reboilers, pumps, filtration, tanks).
  • Select materials for amine and wet CO₂ service with process and corrosion specialists.
  • Prepare data sheets and requisitions, run bid evaluations, review vendor drawings, and plan fabrication, modularization, transport, and installation.


REQUIREMENTS


  • Bachelor's degree in Mechanical Engineering.
  • 10+ years of mechanical/static equipment experience in heavy industry, including 5+ years on pressure vessels and columns with internals.
  • Working knowledge of ASME Section VIII, ABSA/CSA B51, API 650, and PV Elite or COMPRESS.
  • Amine, acid gas, or carbon capture plant and large or field-erected tower experience are strong assets.



MECHANICAL SENIOR ENGINEER 2 – COMPRESSION & CHILLING


Lead the CO₂ compression and chilling systems, from specification and vendor selection through testing and startup.


RESPONSIBILITIES


  • Specify and select CO₂ compression trains (integrally geared centrifugal, reciprocating, dense-phase pumps), drivers, coolers, and lube and seal systems.
  • Specify refrigeration and chilling systems, including chillers, chilled water, cooling water, and air coolers.
  • Run bid evaluations, coordinate anti-surge and pulsation/vibration studies, review vendor data, and witness factory tests.
  • Integrate with process on dehydration and pipeline delivery, and support commissioning.


REQUIREMENTS


  • Bachelor's degree in Mechanical Engineering.
  • 10+ years of mechanical or rotating equipment experience in heavy industry, including 5+ years with gas compressors and refrigeration or chilling packages.
  • Working knowledge of API 617, 618, 614, 610, and 661, ASME B31.3, and CSA B52.
  • CO₂ compression for CCS, EOR, or dense-phase service is a strong asset.



DESIGNER – FLUE GAS / EXHAUST DUCTING


Lay out and model the large-diameter ductwork that carries flue gas from the host facility's existing stacks, boilers, or heat recovery units to the capture plant and back.


RESPONSIBILITIES


  • Design duct routing, transitions, stiffeners, supports, expansion joints, dampers, drains, and insulation, including tie-ins to existing stacks using laser scans.
  • Produce general arrangement, fabrication, and support drawings, MTOs, and tie-in packages.
  • Coordinate with mechanical, structural, process, and piping disciplines and support construction.


REQUIREMENTS


  • Diploma in Mechanical Engineering Technology or Drafting/Design.
  • 8+ years designing industrial ductwork for boilers, HRSGs, power plants, or emissions control systems.
  • Proficiency in AVEVA E3D/PDMS, Smart 3D, or AutoCAD Plant 3D, Navisworks, and point-cloud scans.
  • FGD, SCR, or carbon capture retrofit experience and a CET or P.Tech. designation are assets.



FOR ALL ROLES


REQUIREMENTS


  • P.Eng. with APEGA (engineering roles) or eligibility to register within a reasonable timeframe.
  • Legally eligible to work in Canada and available to start in early 2027.
  • Strong communication skills and comfort working embedded with a client team.


WHY JOIN CANEIL


  • High-impact carbon capture work in one of Canada's most active CCUS markets.
  • Shape the design from an early stage in a growing multidisciplinary team.
  • Full-time permanent or contract options, and support for continuing education and licensure.


COMPENSATION & BENEFITS


  • Expected starting base salary range: $120,000 – $170,000 per year. Placement within this range is heavily dependent on the role and on each candidate's experience, qualifications, and professional designation.
  • Contract rates are also available for these positions.
  • Benefits for eligible full-time employees, including extended health, dental, and paid vacation.
  • Flexible in-office, hybrid, or remote arrangements, subject to project and client requirements.


HOW TO APPLY


Apply through LinkedIn with a current resume, noting the role(s) you are applying for. Only those selected for an interview will be contacted.